Satel INTEGRA Plus Spezifikationen Seite 39
- Seite / 82
- Inhaltsverzeichnis
- LESEZEICHEN
Bewertet. / 5. Basierend auf Kundenbewertungen
SATEL INTEGRA Plus 37
INT-KLFR,
INT-KSG with firmware version 1.02 (or later),
INT-TSG,
INT-TSI.
The value of EOL resistors for the zones in zone expanders with firmware version 4.00 or
later can be programmed:
using the keypad, in the service mode, by means of EOL
R1
RESISTOR
and EOL
R2
RESISTOR
functions (S
TRUCTURE
H
ARDWARE
E
XPANDERS
S
ETTINGS
[ expander
name]
EOL
R1
RESISTOR
/
EOL
R2
RESISTOR
);
using the D
LOAD
X program, in the "Structure" window, "Hardware" tab, after clicking on the
given expander.
For the zones in INT-KSG keypad with firmware 1.00 or 1.01, the value of EOL resistors is
programmed in the D
LOAD
X program, "Structure" window, "Hardware" tab. After clicking on
the given keypad, select the corresponding tab. The value of these resistors cannot be
programmed from the keypad.
The recommended version of INT-KSG keypad firmware is 1.02 (or later).
Fig. 4. Numeration of EOL resistors. T – tamper. A – alarm. M – masking. In case of the EOL
and 2EOL configurations, the R3 resistor value is irrelevant. In case of the EOL configuration,
the resistor value is a sum of the values programmed for the R1 and R2 resistors.
3.3.3 Programming the zones
The zones can be programmed:
using the keypad, in the service mode, by means of the functions available in the Z
ONES
submenu;
using the D
LOAD
X program:
1. in the "Structure" window, "System" tab, after clicking on the selected zone;
2. in the "Zones" window.
3.3.4 Zone parameters
Zone name – individual name of the zone (up to 16 characters).
Partition – partition to which the zone belongs.
Zone type (see: section Z
ONE TYPE
p. 40).
Entry delay – refers to the delayed zones (including the zone types: 0. E
NTRY
/E
XIT
,
1. E
NTRY
, 2. D
ELAYED
,
3. I
NTERIOR DELAYED
, 85. E
NTRY
/E
XIT
–
CONDITIONAL
and
- PROGRAMMING 1
- 2 Programming SATEL 4
- SATEL INTEGRA Plus 3 5
- 1. General 6
- 2. Programming options 6
- 2.1.5 Service mode menu 7
- 6 Programming SATEL 8
- SATEL INTEGRA Plus 7 9
- 8 Programming SATEL 10
- SATEL INTEGRA Plus 9 11
- [n – counter number] 11
- SATEL INTEGRA Plus 11 13
- [n – identifier number] 13
- 12 Programming SATEL 14
- SATEL INTEGRA Plus 13 15
- 14 Programming SATEL 16
- SATEL INTEGRA Plus 15 17
- 16 Programming SATEL 18
- SATEL INTEGRA Plus 17 19
- (only INT-S and INT-SK) 19
- (only INT-SCR) 19
- [n – number of output] 19
- 18 Programming SATEL 20
- SATEL INTEGRA Plus 19 21
- (does not apply to CA-64 DR) 21
- 20 Programming SATEL 22
- SATEL INTEGRA Plus 21 23
- 22 Programming SATEL 24
- 2.2 DLOADX program 25
- 24 Programming SATEL 26
- SATEL INTEGRA Plus 25 27
- 26 Programming SATEL 28
- program 29
- 28 Programming SATEL 30
- SATEL INTEGRA Plus 29 31
- LOADX program 32
- Configuring the GSM module 33
- Initiating a connection 33
- 3. System structure 34
- 3.2.3 Partition parameters 35
- Partition type 36
- Options 37
- 3.3 Zones 38
- 3.3.3 Programming the zones 39
- 3.3.4 Zone parameters 39
- 38 Programming SATEL 40
- SATEL INTEGRA Plus 39 41
- 3.3.5 Zone types 42
- SATEL INTEGRA Plus 41 43
- 3.3.6 Zone options 44
- SATEL INTEGRA Plus 43 45
- 44 Programming SATEL 46
- 3.3.7 Counters 47
- 3.3.8 Bypasses 47
- 4. Outputs 48
- 4.1 Output parameters 49
- 4.2 Output functions 49
- 48 Programming SATEL 50
- SATEL INTEGRA Plus 49 51
- 50 Programming SATEL 52
- SATEL INTEGRA Plus 51 53
- 4.3 Options 54
- 4.4 Output triggering 54
- 4.6 Output disabling 55
- 4.8 Output groups 56
- 4.9 Output state indicating 57
- 4.11 Output testing 57
- 5. System options 58
- 5.2 Printer options 59
- 5.3 Other options 60
- SATEL INTEGRA Plus 59 61
- 4 Arming options 62
- Times 5.5 63
- 5. r parameters 63
- 62 Programming SATEL 64
- 6. Programming the keypads 65
- 64 Programming SATEL 66
- SATEL INTEGRA Plus 65 67
- 66 Programming SATEL 68
- 7. Timers 69
- 8. User schedules 70
- 9. Reporting 70
- SATEL INTEGRA Plus 69 71
- 9.1.2 Advanced options 72
- Identifiers 73
- SIA / TELIM prefix 74
- Events assignment 74
- 9.1.4 SIA-IP 74
- 9.1.6 Event codes 74
- 9.2 Starting the reporting 75
- 9.2.3 GPRS reporting 76
- 10. Messaging 77
- 76 Programming SATEL 78
- 10.2.1 Events assignment 79
- 78 Programming SATEL 80
- SATEL INTEGRA Plus 79 81
- 13. Manual update history 82
Verwandte Produkte und Handbücher für Sicherheitszugriffskontrollsysteme Satel INTEGRA Plus
(27 Seiten)© 2020, manymanuals.de. Alle Rechte vorbehalten. | 0.021 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern